| STEP
2 |
>
Pull 1-7/8" white tube out of 2" white tube |
 |
| STEP
3 |
>
Separate the two blue tubes |
 |
| STEP
4 |
>
This step is to facilitate installation of the rink. In order
to give the blue tubes their original shape, reinsert white
tubes inside blue tubes. |
 |
| STEP
5 |
>
Slide white tube all the way in. |
 |
| STEP
6 |
>
Let all tubes rest for 24 hours at room temperature. Blue tubes
will retain the proper shape and will be easier to install.
|
 |
| TIP
FOR CORNER INSTALLATION |
>
Make sure that the white foam follows the exact same angle as
the molded blue corner |
 |
| STORAGE
TIP |
| >
Upon storage, after the season, blue tubes should be put on
top of white tubes. |
 |
